Soil Test Kit (N, P, K, pH) 80 Tests

 43.75

Rapitech STK008 Soil Test Kit for measuring pH and NPK (80 tests)

Test your soil for a healthy garden! To test the soil in garden beds where you will plant shrubs, perennials, vegetables or fruit, dig down 10 cm with a trowel and take a small sample at that level. For lawns, annuals and houseplants, take a sample 5 – 8 cm below the soil surface. Easy system to prepare your soil samples. Compare your test results for pH, N (Nitrogen), P (Phosphorus) and K (Potassium) individually with the included color reading chart. In total 4X 20 tests. English manual and pH preference list included.

In stock

SKU: PCT210 Category:

Rapitech STK008 Soil Test Kit for measuring pH and NPK (80 tests)

Test your soil for a healthy garden! To test the soil in garden beds where you will plant shrubs, perennials, vegetables or fruit, dig down 10 cm with a trowel and take a small sample at that level. For lawns, annuals and houseplants, take a sample 5 – 8 cm below the soil surface. Easy system to prepare your soil samples. Compare your test results for pH, N (Nitrogen), P (Phosphorus) and K (Potassium) individually with the included color reading chart. In total 4X 20 tests. English manual and pH preference list included.

USER MANUAL RAPITECH SOIL TEST KIT STK008

pH 20 tests – Nitrogen (N) 20 tests – Phosphorus (P) 20 tests – Potassium (K) 20 tests
Test your soil for a healthy garden !

PREPARING YOUR SOIL SAMPLES

For lawns, annuals or house plants, take the soil sample from about 5-8 cm below the surface. For perennials especially shrubs, vegetables and fruit, the sample should be taken 10 cm deep. Avoid touching the soil with your hands. Test different areas of your soil, as it may differ according
to past cultivation, underlying soil differences or a localized condition. It is preferable to make individual tests on several samples from different areas, than to mix the samples together. Place your soil sample into a clean container. Break the sample up with the trowel or a spoon and allow it to dry out naturally. This is not essential, however it makes working with the sample easier. Remove any small stones, organic material such as grass, weeds or roots and hard particles of lime. Then crumble the sample finely and mix it thoroughly.

pH TEST

1.Put the dry crumbled soil in a test tube up to the 1 ml. mark. Add one spoon of barium sulphate.
2.Add the pH test solution to the 2,5 ml. mark. Cap the tube.
3.Shake the tube thoroughly.
4.Put the tube down and leave it to settle for about 5 minutes. If the solution takes too long to settle, add another scoop of barium sulphate and re-shake. Compare the color of the test tube with the colors of the pH reading chart to see the result.

N, P AND K TESTS

The filtering device and filter disks are used for the Nitrogen, Phosphorus and Potassium tests to extract nutrients from the soil.

STAGE ONE: PREPARING THE FILTERING DEVICE

Unscrew the green cap of the device and remove the plunger. Put one of the filter papers into the bottom of the plunger ensuring a neat fit by using the end of the spoon.

SPECIAL NOTE: if the soil is particularly clay based, or the solution that filters through is too clouded, use two disks together.

STAGE TWO: FILTERING THE NUTRIENTS

1.Fill the barrel of the filtering device with your dry and crumbled soil sample to the level required:
N op to 1 ml., P up to 0,5 ml., and K up to 0,5 ml.
2.Add the appropriate test solutions: N Test = add N1 solution up to the 2,5 ml. mark, P Test = add P1 solution up to the 2 ml. mark, K Test = add K1 solution up to the 2 ml. mark.
3.Insert the plunger just inside the barrel of the filtering device and gently shake for 30 seconds. Press the plunger down slowly, until it just touches the soil/test solution in the barrel.
4.Put the cap on the filtering device and screw it down slowly until you see the solution filtering from the barrel into the plunger. You may feel strong resistance while filtering. Holding the filtering device at a 45 degree angle rather than holding it straight up should help to relieve the resistance.
5.When there is enough solution in the plunger, unscrew and remove the cap of the filtering device, and pour the solution from the plunger into a test tube up to the 1 ml. mark. Complete the test with the specific instructions for N, P and K (you’ll find them below).

NITROGEN (N) TEST

Add one level spoon of the N2 powder. Cap the test tube and gently shake for 10 seconds. Let the tube stand untouched for 5 minutes. Take your reading by holding the test tube against the Nitrogen reading chart.

PHOSPHORUS (P) TEST

Add ½ of a level spoon of the P2 powder. Cap the test tube and immediately take the color reading by putting the tube on the circle printed next to the comparison chart and look down through the tube to judge the color against the Phosphorus reading chart.

Look down through the tube for Phosphorus and Potassium test readings.

POTASSIUM (K) TEST

Add now 0,5 ml. of the K2 solution. Let the tube stand untouched for 5 minutes before taking a reading. The solution will show a certain degree of cloudiness according to how much Potassium is present. Put the test tube in the circles printed next to the black and dotted rectangles in the Potassium Reading Chart. Put the tube first on the High (= Surplus) reading, and move it down the chart until one of the boxes is just visible. This box will be the result of your Potassium reading.

TO RAISE OR LOWER THE pH OF YOUR SOIL

Raising and lowering pH is not an exact science & most plants have a reasonably wide tolerance, certainly within 1 pH point. Consult the pH preference list and you will see that the majority of all plants can manage well on a pH around 6,5. But some need an alkaline soil and some a particularly acid soil. Altering pH takes time, so do not expect rapid changes. You’d better work steadily to provide your plant with ideal conditions.

ADJUSTING SOIL pH

pH can be adjusted to provide more suitable growing conditions for the different plants you wish to grow. Or, you can leave the pH of the soil as it is, and select plants that like the level revealed by your test. Once you have your pH reading, check the pH Preference list below (or look it up on the internet) for the ideal pH levels of your plants, trees, shrubs, vegetables or fruits. If your pH reading differs significantly from the recommended levels, you need to adjust your soil pH. You can correct pH at any time of the year, but the best period is to start in the Fall and to check progress in the Spring. Products to raise the pH level are: dolomitic (or calcic) limestone and hydrated lime. Products to lower the pH level are iron sulfate and aluminum sulfate. These products are available in specialized garden stores.
Warning: Do not add lime and fertilizer together; lime first. Allow at least 1 month to pass before applying fertilizer. Retest 30 days after applying fertilizer.

SOIL TYPES

Sandy soil: A light, coarse soil comprised of crumbling and alluvial debris.
Loam soil: A medium friable soil, consisting of a blend of coarse (sand) alluvium and fine (clay) particles mixed within fairly broad limits with a little lime and humus.
Clay soil: A heavy, clinging, impermeable soil, comprised of very fine particles with little lime and humus and tending to be waterlogged in winter and very dry in summer.

FERTILIZER RECOMMENDATIONS

Adequate reserves of plant food should be available in the soil before planting vegetables, preparing a seed or flower bed, sodding or seeding a lawn, or planting shrubs and trees. To make up any deficiencies, apply fertilizers according to your test soil result. You can buy products in a specialized garden store to increase the individual levels of N, P and K.

SPECIAL RECOMMENDATIONS FOR LAWN

In case of a new lawn, pay special attention to soil preparation before planting. Proper soil preparation for any size lawn will have a significant impact on the amount of water and care it demands in the future. Till the soil to a depth of at least 30 cm and incorporate plenty of organic material (20 cm or more). Test your soil for pH and adjust to the levels recommended on the pH preference list for your type of grass. Refer to the adjusting soil pH chart for recommended lime or sulfate applications. For established lawns, Nitrogen is the most essential nutrient to promote lush growth and a deep, green color. Phosphorus and Potassium, in lesser quantities, are also important for strong root formation and growth. Compound fertilizers will supply all 3 nutrients, or you can select an individual fertilizer such as Nitrate or Soda.

SAFETY & HYGIENE

All the liquids and powders are safe if used correctly. Keep out of the reach of children and animals, and ensure that you wash your hands thoroughly after each test. In the event the liquid or the powder is swallowed, drink plenty of water and seek medical advice. Keep away from food and drinks.

CLEANING AND STORAGE

It is important to wash out all the test tubes and the filtering device in warm soapy water immediately after each test. Rinse well and wait until the tubes and the filtering device are dry. The kit should be stored in a clean and dry environment, preferably in a sealed container. Make sure all the bottles are properly sealed and that storage conditions are not subject to extreme heat or cold.
Once opened, the liquids and powder should be used within a twelve month period. The filter papers must remain dry !

FINDING THE RIGHT PH VALUE

Have a look at the Ph-Preference list on our website www.plantcaretools.com or search for the proper pH value online.

Soil Test Kit NPK pH   STK008 Soil Test Kit display

You may also like…

Fertometer fertilizer tester

Fertometer

 20.75

Copyrights © 2021 Plantcaretools All Rights Reserved.

X