Plant pulse moisture sensor

 14.40

This moisture sensor warns you when your plant needs watering

It has never been easier to keep your (potted) plants perfectly watered. Don’t waste water! The plant pulse moisture sensor continuously monitors your plant’s moisture levels at root level and gives you live feedback alerting you when to water. A bright LED light will flash red when the soil needs watering.

In stock

SKU: PCT140 Category:

Plant pulse moisture sensor – continuously monitors soil moisture level

It has never been easier to keep your (potted) plants perfectly watered. Don’t waste water! Plant Pulse’s innovative and energy efficient technology continuously monitors your plant’s moisture levels at root level and gives you live feedback alerting you when to water. A bright LED light will flash red when the soil needs watering.

Keep your plant healthy by watering when the sensor flashes red. It will flash for a longer period of time the dryer the soil gets.

The sensor will double blink when the batteries need replacing.

Batteries included.

Manual Plant Pulse

It has never been easier or more hassle-free to keep your indoor and outdoor potted plants and gardens perfectly watered. Don’t waste water! Plant Pulse’s innovative and energy efficient technology continuously monitors your plant’s moisture levels at root level and gives you live feedback alerting you when and when not to water. A bright L.E.D. light will flash red when soil needs watering. Batteries included.
Activate Plant Pulse:
-Turn head cap counter-clockwise, line up arrow with “ON”.
(Deactivate: turn head cap clockwise, line up arrow with “OFF”).
-Insert probe into soil at mid-root. Push the soil firmly against the probe with your fingers.
-L.E.D. will flash red for 10 seconds (every minute) when soil needs watering.
-No flashing light signifies plant is well-hydrated.
*Important: Proper care and response time will extend battery life.
Adjust the Plant Pulse if it starts to blink too early or too late:
If you have a plant that needs more than average water or you want to be warned faster by the red light, insert the plant pulse less deep (higher) in the soil than you did before. If this does not lead to the desired result, try again to insert the probe again less deep. Make sure to always press the soil against the probe with your fingers.
If you have a plant that requires less than average water or you wish to be warned later by the red light, insert the plant pulse deeper than you did before. If this does not lead to the desired result, try it again even deeper. Make sure to always press the soil against the probe with your fingers.
You need to leave always at least 0,5 cm of the probe between the soil and the white cap of the plant pulse.

Battery Replacement:
The Plant Pulse requires 2 x AC13 alkaline cell batteries.
-Turn cap clockwise (past “Off” position), line up arrow with dot.
-Pull cap upward to remove.
-Press metal tab inside to release cell batteries and replace.
-Replace cap, line up arrow with dot and push down firmly.
-Turn cap to desired On/Off position.
*Pulse double blinks when batteries need replacement.

              

You may also like…

4 in 1 Bluetooth Plant Care Monitor

4 in 1 Bluetooth Plant Care Monitor

 34.90

Seramis moisture indicator 2x16cm

Moisture indicator 2x16cm

 3.90

Digital Soil Moisture Sensor with LEDs

Moisture sensor with 7X LED

 9.60

Copyrights © 2021 Plantcaretools All Rights Reserved.

X